Dry and Wet Forklift Inspection Checklist

Have you ever wondered how to make it safer for operating forklifts in dry and wet conditions? Conditions can be dangerous when oil, water, and spills aren’t seen. Tip overs can also be an issue when traveling over gravel and uneven ground. In this article, we suggest two types of forklift inspection checklist.

The 29 CFR 1910.178(q)(7) OSHA standard states mandatory forklift inspections, but there are no rules in the standard specific to how to properly inspect. A Dry and wet forklift inspection checklist is required daily before or after each work shift.

Forklift Inspection Checklist

Forklift inspection checklist can prevent accidents related to wear and tear. Equipment takes a toll on daily workplace operations and repetitive routines in companies. With safety measures, you can ensure a healthy and safe workplace when employees are operating. Below is an infographic with the slight differences between dry and wet forklift inspections.

Dry and Wet Forklift Inspection Checklist

Dry Forklift Inspection

  • Summer Tires
  • Horn
  • Gauges
  • Lighting
  • Forks
  • Fire Extinguisher
  • Battery
  • Grease Forklift Chain
  • Wheel Chocks
  • Lock-outs
  • Cracks
  • Misalignment
  • Test Brakes

Wet Forklift Inspection

  • Winter Tires / Tire Chains
  • Horn
  • Gauges
  • Waterproof Lighting
  • Forks
  • Battery and Starter Test
  • Wheel Chocks
  • Lock-outs
  • Forklift Chain
  • Rust and Corrosion
  • Cracks
  • Misalignment
  • Avoid Cold Starts
  • Avoid Short Operation in the Winter
  • Forklift Cab Cover
  • Test Brakes

Forklift Inspection Requirements

Proper forklift inspection requirements require a visual inspection, an operating inspection, and documenting all inspections. OSHA estimates that each year forklifts account for approximately 100,000 industrial injuries.

Visual Inspection

A visual inspection allows you to identify damaged forklifts, for example, any: pressure marks, dents, cracks, chips or normal wear and tear beyond safety limit.

Operating Inspection

Once a visual inspection is completed, operators should turn the engine on and do an operating inspection testing controls work properly. Evaluate the accelerator linkage, inch control if equipped, brakes, and steering. Is the steering too hard to turn or too loose.

It is just as important to test controls, tilt, forward, backward, hoist and lowering control. Check on the horn, lights, and back-up alarm.

Document Inspection

Follow through with the dry and wet forklift inspections checklist daily, it is essential to perform proper document inspections. If an operator is unaware of a safety condition that would require a forklift to be put out of service, because consequences could be fatal. Proper forklift safety training can ensure operators know what to look for when conducting a forklift inspection.

Interested in becoming a forklift train the trainer or just furthering your career we provide instructor courses in your area. Check out our other available forklift train the trainer courses we offer for the crane and aerial lift industry. AP Safety Training has an all in one CAL OSHA training safety management program. Contact us at (888) 501-1355 toll-free for any questions and prices we are locally located in CA.

Forklift Safety Tips

A forklift is an important piece of equipment in any manufacturing business, distribution center or factory. The quality and adaptability of lift trucks positively make life simpler for the general population who work in most modern labor warehouses. Without forklifts, it would be nearly impossible to efficiently move heavy objects in these workplace environments.

Since forklifts are heavy machines intended for lifting and carrying enormous and cumbersome loads, the potential for hazards is high.
Realizing how to work a forklift safely is fundamentally significant for any operator who utilizes one. Operators must know about their environment, duties, and practices. Indeed, almost 20,000 individuals are harmed every year because of mishaps including forklifts. The uplifting news is most, if not all, of these injuries, can be avoided.

Download the Equipment Depot Forklift Safety Infographic

Infographic created by Equipment Depot.

Mobile Elevated Work Platforms (MEWP’s)


Mobile elevated work platforms (MEWP’s). The new ANSI standards were released December affecting owners along with operators and supervisors currently operating on aerial lift work platforms. This includes Boom lifts, scissor lifts and under bridge inspection machines.

This new standard is designed to improve and enhance safety equipment standards to be similar to the international standards. This creates more competition in the global marketplace when providing for companies and equipment manufacturers.

ANSI A92 Mobile Elevated Work Platforms Classifications

Understanding the new ANSI A92 Mobile Elevated Work Platforms (MEWP’S) standards and classifications. Aerial work platforms are now known as mobile elevating work platforms (MEWP).

Machines will now be broken up into groups instead of being classified for equipment type. If a mobile elevated work platform is able to maneuver past the tipping lines it is considered a group B.

Mobile Elevated Work Platforms Classified into 3 Types

Type 1 work platform can be driven when the platform is not elevated. Type 2 is when equipment can be driven elevated but operated from the chassis. Type 3 allows the operator to control the work platform when elevated.

Group A, Type 3 MEWP Stock-Pickers and Electric Scissor Lifts

Both considered a Group A platform because they never extend beyond the wheels or tipping point line and the lift is able to be operated from the platform.

Group B Type 3 MEWP Boom Lifts

An aerial lift platform that extends beyond the wheels or tipping point and can be operated while on the elevated work platform is considered a Group B.

ANSI Standard A92.22 – Safe Use

Develop a risk assessment and site safety plan. For both companies and full-time owners who now and then rent aerial lift equipment must have a plan documented and shared with everyone on the worksite.

Risk Assessment

Risk Assessment and safety plan includes:

  • Job description location and time frame
  • Identify risk related to the MEWP or other equipment and hazards.
  • List of workers that received training.
  • Rules on preventing unauthorized use of a MEWP.
  • Workplace safety measures and procedures.
  • Be completed before work begins.
  • Select the best MEWP for the job.
  • Shared with everyone on the work site.
Steps that must be taken within plan:
  • After a fall
  • If the platform becomes entangled
  • If the machine fails

The plan must be shared with all workers at the workplace or job site and should be added to the company training manual.

  • Anyone working near or on a MEWP needs to have training on what they should do if someone were to fall or if they fall.
  • Set limits on how long a properly restrained worker can hang suspended in the air.
  • A rescue plan must include options for self-rescue assisted rescue and technical services.

ANSI Standard A91.24 Training Standards for Aerial Operators

Mandatory documented training remains for aerial equipment operators. Occupants and supervisors are now required by the new standard.

Changes to ANSI training Standards

  • Reading the operator manual.
  • Doing a walk around inspections.
  • Getting familiar with the controls
  • Understanding any limitations for equipment

AP Safety Training Solutions, LLC. is a company that provides all in one safety programs. We will keep companies and individuals by keeping them certified and trained. Meet OSHA’s latest standards and regulations annually. Please contact us at (888) 501-1355 toll-free.

Original MEWP’s Article

Forklift Operator Job Certification

Forklift Operator Job Certification

Forklift Operator Job Certification Outline

Forklift operator certification allows you operate a forklift at a job site to load and unload materials and deliveries and move them from storage areas, machines, and loading docks, into railway cars or trucks or even storage centers.

Forklift Operator Job Duties

  • Crucial duties and duties
  • Obtains backup of production program or transportation order and transfers substance or gear to and from designated regions in the center.
  • Loading and unloading products from vehicles such as trucks or aircraft.
    Moving goods packaged on pallets or in crates across the storage center off-the-shelf products in the Proper storage bays, after inventory management directions.
  • Checking loads are protected.
  • Stacking empty pallets.
  • Performing daily gear checks such as recharging the truck’s battery and draining equipment.
  • Removing machine attachments and waste substance from machines.
  • Assessing merchandise to confirm conformance to quality standards.
  • Dumping materials into machine hoppers.
  • Qualification requirements.
  • Senior School diploma or equal.
  • Good math, language and reading skills; basic computer skills might be required.
  • High Level of focus required to prevent harm to other people; encourage a secure work environment.
  • Follow directions for operating equipment and storing documents.
    Execute missions in a precise, timely and safe way.
  • Maintain tidy & safe surroundings.
  • Might Have to utilize RF scanner gun.
  • Clean driving record and a valid state motor vehicle operator’s license may be required.
  • Fork Lift certification per OSHA standards.
  • Physical requirements and skills.
  • Regularly sitting on a powered industrial truck.
  • Frequently lift up to 50 pounds and adjust body place to bend, stoop, stand, walk, turn, pivot, and endure for long periods of time.
  • Having a Great sense of equilibrium.
  • Having great eye-hand-foot coordination.
  • Skill to evaluate weights and gauge distances and heights.
  • Ability to work at varying temperatures, determined by season.

Forklift Operator Certification School

Contact All Purpose Forklift Training today and get certified in near your area for all types of forklifts and aerial lift in your business or company. Give us a call for prices and dates at (888) 501-1355. Classes fill quickly schedule now.

Forklift Certification Near You

Forklift Certification Near You

Best forklift certification courses near you and throughout the United States. We provide forklift certification for major companies and properly train individuals to become operator certified for the forklift industry.

Our forklift instructors are the best when it comes to training workers and how to correctly operate a forklift not just by getting certified but meeting OSHA’s latest standards and regulations for approximately three years. This forklift instructor program will help train the trainer courses and encourage staff to be a certified forklift operator. This way forklift training can be completed in house or on demand, should you need a one-time forklift instructor service. Or, you can hire a toaster trainer that will train your operators to get you.

Straight-forward visit All Purpose Forklift Training School we will assist with any questions regarding forklift training programs and getting certified.

In House Forklift Instructor Training

The in house forklift instructor training courses is one of our in house instructor programs that we supply to our customers. Customized to offer forklift operator training with the teachings of a successful training plan based on curriculum standards to adhere to.

The in house instructor courses are delivered through multimedia presentations, interactive discussions, and clinics. The in house instructor participants are supplied with a safe learning class or environment to clinic operator training performance and class management techniques to participate users and ensure learning goals are being precisely achieved.

Does a Forklift Instructor Certification Expire

Our Train The Trainer classes and certifications can be a very valuable tool for teaching that a worker for a trainer, however minus official designations, and consequently, there is an”expire date” since it pertains to OSHA requirements. Within this example, OSHA just says that the trainer needs to be”competent”.

Fork Lift Instructor Requirement

All operator training and tests will be conducted by a person who has the knowledge, training, and experience to train powered industrial forklift truck operators and evaluate their competence. – 1910.178(l)two (iii)

Contact All-purpose Fork Lift Training School

Contact our forklift school regarding instructor training programs and all other forklift questions. Please phone us Toll-Free at 888 501-1355 or visit All Purpose Forklift Training. Courses fill fast!

Forklift Training Locations
Read another forklift blog:

Forklift Operating in the Sun

Forklift Operating in the Sun

Forklift operating in the sun for summertime is generally a busy-time for forklift drivers. Increased orders, overtime hours normally peak in the summertime, along with with also the exceptional requirement and challenges of outside weather operations (for several employees ) require attention to detail and also safety-minded methods to prevent injuries.

As a forklift operator, your company is responsible for ensuring you’re kept safe and never exposed to health-threatening scenarios. However, there are a number of things that you can do to safeguard yourself from the harsh conditions when operating in the sun and warm weather of summertime.

Heat Dangers for Forklift Operating in the Sun

Heat dangers for operating when body internal temperature during perspiration and circulating blood flow into the epidermis. Whenever someone is in a really hot environment, your own body is not able to keep its usual temperature too, and warming your system become more challenging.

After the blood contributed to the skin can’t shed its heat, sweat becomes the principal method for your system to discharge the surplus heat. But, perspiration is only powerful if the moisture in the atmosphere is reduced enough to enable the sweat to evaporate, and whether the salts and fluids in the body which are lost through perspiration are substituted with appropriate hydration and nourishment.

After the body can’t expel the surplus warmth, the body’s internal temperature increases in addition to the heartbeat. This may result in heatstroke, heat rash, and sickness, tingling, lack of concentration, and sometimes even death.

If you’re going to working in dangerous heat outdoors in the summer. When forklift operating, it is essential that you get ready for the heat and knowingly take the actions required to create certain that you are hydrated, nourished, and maintained cool.

The risk for Heat Hazards

Whos at the risk for heat hazards? Employees who are commonly at risk for heat hazards are the ones who usually spend time outside without a lot of colors, and while sporting non-breathable clothes and hats are a few of many vulnerable to heat dangers.

Even in the event that you will not be operating much outside, warehouses and other indoor areas which are not well-ventilated or insufficient air conditioning may get warm and humid and also lead to heat-related disease. The danger increases if you’re going to be working about radiant heating resources or handling hot things.

A number of jobs at risk for hazards are:

  • Iron and steel foundries
  • Nonferrous foundries
  • Brick-firing and ceramic crops
  • Glass manufacturing plants
  • Rubber product mills
  • Electrical utilities, for example, boiler rooms
  • Food canneries
  • Chemical plants
  • Mining Websites
  • Smelters
  • Steam Lines
  • Building work
  • Farm work
  • Gas and oil well operations
  • Asbestos removal
  • Landscaping
  • Hazardous waste site actions

Forklift Safety Tips for Operating in the Sun

Forklift Safety Tips for Operating in the Sun

Need forklift safety tips for operating in the sun? Whether you are at home operating a forklift or at work for a company as a forklift driver, then maintain safe this summer in the sun by discussing these useful tips:

Stay hydrated.

Stash a bottle of water on your own pipe. With increasing temperatures, the possibility for cramping or dehydration raises. To be able to run your elevator nicely, you’ve got to be physically ready. Staying hydrated is half of the battle through the dog days of the summer.

Do not skip your upkeep program.

With sweltering circumstances, your forklift requires some excess attention, also. Overheating is a frequent issue, so ensure your maintenance program is followed. Nothing destroys a change quicker than the usual broken-down forklift.

Take more regular breaks.

It might appear counterproductive to require more breaks, however, as a forklift operator, you can not do much great work if you are dehydrated, overheated, and also have misplaced your focus on the activities at hand. During the workday, they have more frequent breaks to rest in the shade, drink water, and revel in a little snack to maintain your fluid levels up and stop an empty belly out of additional depleting your inner reservations.

Shield yourself against sunlight.

For outside workers, it can be crucial to summer-long security. Spend 10 hours outdoors under sunlight, and you will finally feel the effect. If you operate at a shipyard, dock or other outside settings, then keep yourself protected using a coat, sunscreen or other roof covering.

Construct a tolerance for functioning in heat.

Since the one responsible for keeping employees safe and preventing injuries and sickness, employers must allow returning and new employees to construct a tolerance to the heat and slowly increase workloads since they become excruciating.

Monitor signals of heat-related disease.

The perfect approach to stop heat-related disease and injuries from occurring on a worksite would be to carefully track the indicators and symptoms of these starts of heat-related distress.

The most frequent symptoms include:

  • Confusion
  • Headache
  • Nausea
  • Dizziness and weakness
  • Irritability
  • Loss of attention
  • Heavy perspiration
  • Muscle cramping
  • Loss of awareness
  • And seizures

Get Forklift Operator Certified!

looking to get forklift operator certified? Contact us today and get forklift certified and trained properly meeting the latest operator standards and regulations. Fill out our form and schedule for a forklift certification training program or re-certification. Call toll-free today at (888) 501-1355.

Forklift Operator School

Our forklift operator certification school will prevent accidents and maintain a safe workplace with a proper program in place meeting the latest OSHA standards and regulation Nationwide.

Every year forklift accidents happen and on average there are 85 deaths and 34,900 accidents.

Save time and money and avoid injuries or death. Keep employees safe with the proper forklift safety program.

Visit our site or contact us for a forklift certification to become a forklift instructor.

Get properly trained according to the employer and OSHA standards. Keeping employees safe is our number one priority.

Contact All Purpose Forklift Training School

Contact our forklift operator certification school regarding training programs and all other forklift inquiries. Please call us toll-free at (888) 501-1355 or visit All Purpose Forklift Training. Classes fill quick!

Read a forklift blog:

If you don’t have Forklift Certification What happens?

If you don't have Forklift Certification What Happens?

If you don’t have a forklift certification you can cost companies or even worse be a danger to yourself and others. Forklift operations could be dangerous for workers and contribute to costly OSHA forklift citations.

Become a properly certified forklift operator to avoid accidents along with the forklift safety violations.

Forklift Certification Operator Training

Lack forklift certification operator training could be your most summoned violation. A worker should be evaluated every three years once trained.

Operators should inspect all forklift trucks before daily use. They must avoid driving too fast, or with a heightened load. Loading docks are especially dangerous, listed below are the hazards.

Forklift Certification Training Program

Contact us today by filling out a form and schedule for a forklift certification training program or recertification. Meet the latest OSHA standards and regulations. Call us toll free today at (888) 501-1355.

How to Get Forklift and Scissor Lift Training

How to Get Forklift and Scissor Lift Training Programs

Forklift and Scissor Lift Training Programs

Forklift and scissor lift operator safety training School. OSHA requires all forklift and aerial lift programs, along with other powered industrial trucks must receive appropriate lift safety training and certificate.

If you are a forklift driver or company located inside the USA area, you will be delighted to learn that All Purpose Forklift Training provides professional training for operators, in addition to classes for companies wanting to train their own team. We assist in forklift instructor train the trainer courses for personnel in house training.

Forklift and aerial lift training programs we offer are for Genie, JLG, to CAT and Toyota. Here are our established programs offered with quality training:

  • Sit down Counter-balance
  • Stand up Counter-balance
  • High Reach Forklift
  • Self-propelled Elevating Work Lifts (Scissor Lifts)
  • Boom-Supported Elevating Work Lifts (Aerial Lifts)

High Reach Forklift Truck License

High reach forklift truck License duration:

Reach forklift courses can be delivered in a 1-day class or extended to a two-day class.

Forklift class material provided:

  • Workbook
  • Supplementary Handouts
  • Wallet Card Certification Upon Successful Completion of The Training Class

Reach truck training re-certification:

when you have previously taken our Leavitt Machinery standup routine coaching certificate course or training through yet another professional provider and will need to re-certify, please contact Operator Training department for course pricing and availability.

Reach truck in house instructor training course:

Are you interested in becoming an in house educator for the company? Check out In-house Instructor Training for more information.

Who Needs To Obtain Certification?

OSHA’s Powered Industrial Trucks standard (29 CFR 1910.178) necessitates that most workers who operate forklifts, Aerial lifts, or other Powered Industrial Trucks be correctly trained. As stated by OSHA, operators must get formal education, practical training, and performance assessment.

Forklift Driver and Operator Certification

After the successful course, the forklift driver will get an operator certification of training completion along with some wallet-sized training card identifying the kinds of forklifts the student is certified to operate.

How to become Forklift Certified

For anybody considering becoming certified as being a forklift operator, All Purpose Forklift Training supplies scheduled training in our fully equipped Training Center in the United States in your local city. Materials and all equipment have been all provided by us, meaning that you just have to appear.

Forklift Certification Dates: Click Here

On-Site Forklift Train-the-Trainer

For businesses which possess their own equipment, All Purpose Forklift Training provides onsite train the trainer for Forklifts, Scissor lifts, and Aerial Boom Lifts. This program lets your employees train others where the company can benefit off of! Call us or Contact us to discuss exactly how we can provide quality training for you.

Read more forklift blog:

Basic Maintenance for Forklift Trucks

Basic Maintenance for Forklift Trucks

The basic maintenance for forklift trucks that may benefit or help employees employers or others.

An important part of forklift safety is a maintain a regular maintenance schedule for forklift trucks. It enables to prevent potential issues to emerge until they put anyone in serious danger.

Forklift trucks, also known as powered industrial trucks or lift trucks, which are used in a variety of unique industries to lift bulky or heavy loads in warehouses.

READ: Benefits of Forklift Instructor Courses

Forklift Truck Maintenance

The forklift really should not be making any unusual sounds or vibrations and steering should be smooth.

Forklift trucks and other powered trucks must be maintained in good working condition and pass a visual and functional pre-start inspection:

  • The battery needs to become fully charged and in a safe, working state (for example no exposed wires, blocked port caps, etc.).
  • Forklifts need to be sterile and free from excess oil or grease.
  • Ensure that the petroleum, radiator and gas water levels are always secure and that there are no leaks.
  • Tires and brakes have to maintain good working condition.
  • All lights and gauges must be operational.
  • The wheels (such as the deadman brake) need to be effective at bringing the vehicle to an end when fully filled as well as also the parking brake has to become fully operational.
  • Forks and hydraulics mustn’t be broken, chipped or worn outside and also the lift mechanism has to work smoothly.
  • The tilt mechanism should proceed smoothly and grip.
  • The clutch and gearshift have to operate smoothly with no jumps or jerks.
  • The horn, whistle along with other any warning apparatus need to be working.

The most serious and most frequent maintenance issues for forklift trucks include insufficient training, faulty gear, shaky loads, and unsafe driving (including speeding, inattention, and the truck using no seat belts or drivers choosing never to put them on ). Given that these issues might easily lead to a severe episode, it’s essential that safety managers ensure their workplace is compliant with PIT regulations, provide workers with training and dependable equipment, and manage normal tests and maintenance of forklifts.

OSHA Forklift Truck Training

In accordance with OSHA, Forklift Truck Training should also include:

  • working instructions, including visual (key off) and operational (engine running) pre-start tests;
  • truck controls and instrumentation;
  • steering and maneuvering;
  • fork and attachment adaptation, operation and usage constraints;
  • automobile capacity and stability;
  • car inspection and upkeep;
  • refueling and battery charging;
  • further operating instructions from the operator’s guide;
  • surface conditions;
  • lots and their composition and stability, in Addition to stacking and unstacking;
  • pedestrians in the working place;
  • lean aisles and ramps; and
  • shut as well as other environments, which could influence the operator (by way of instance, harmful concentrations of dangerous gases or fumes can overcome the worker in certain spaces).

It’s not necessary to retrain forklift operator drivers in the event that you purchase the same kind of truck from another manufacturer. However, if the vehicle is not the same type then you should provide brand new training. Every three decades, each forklift operator is needed to receive a performance evaluation, which has to include being observed by a trainer or someone experienced in managing forklifts.

Forklift Refresher Training

Refresher training is only required if a motorist is witnessed to have been managing a forklift truck unsafely, received an unsatisfactory test, or the workplace conditions change in a way that affects safe operations. Workers need to be licensed to run virtually any forklift trucks and companies should maintain records of routine training, retraining and accreditation.

Maximize Employee and Individual Forklift Training

All Purpose Forklift Training School Nationwide

Contact us or give us a call at (888) 501-1355 to learn more on forklift safety and the different forklift training programs available to you. We also offer crane operator training and mobile crane operator certification courses.

California Forklift Certification School Locations

Read another forklift blog: